Talkaphone VOIP-201C Surface Mount Single Button Compact IP C Instrukcja Użytkownika Pobierz pdf (Strona 8)

VOIP-200 Series IP Call Station

Configuration and Operation Manual

Page 8 of 8

3.5. Set Date& Time

3.5.1. Time Settings:

Select Enable NTP to set the VOIP-200 to use Network Time Protocol. 1.

If using NTP, enter the Hostname/IP Address of the NTP Server. 2.

If using NTP, select the Time Zone from the drop-down menu. 3.

If manually entering the date and time, enter the Date in yyyy-MM-dd-hh-mm format. 4.

Click Save to save settings. NTP settings will automatically update the date / time. 5.

3.6. Relay

3.6.1. Relay Settings:

Remote Digit For Relay ON: Specify the digit entered during a conversation to activate the relay until a 1.

de-activation event occurs.

Remote Digit For Relay OFF: Specify the digit entered during a conversation to de-activate the relay. 2.

Remote Digit For Timed Relay On: Specify the digit to turn ON the relay for a specific duration of time. 3.

When this digit will is pressed during a conversation, the replay will remain on for the duration of the

time specified under the ‘Timed Relay Duration’ field.

Outgoing Call: Specify the relay state when the button is pressed. To activate the Talkaphone strobe 4.

light connected to the Auxiliary Output, set this value to ‘ON’.

Idle: Specify the relay state when the VOIP-200 returns to an Idle state after the call terminates. To de-5.

activate the Talkaphone strobe light after the call is complete, set this value to ‘OFF’.

1 2 3 4 5 6 7 8

Brak uwag

Talkaphone VOIP-201C Surface Mount Single Button Compact IP C Instrukcja Użytkownika Strona 8